|
|
|
| |
| | | | |  | Suitable for macro-, meso- and some micro-scale applications | | | Case study focused on meso- and micro-scale applications | | | TEMoo lasers from 25 to 400 W |
| |
| | | Metal Cutting
| | |  | | 0.06" mild steel, cut with Synrad 240 watt laser at ~ 120 in/min. |
| |
| |
| | Maximum thickness each power is capable of cutting | |
| Steel |
25W |
50W |
125W |
240W |
| Stainless |
0.01" |
0.016" |
0.025" |
0.08" |
| Mild |
0.01" |
0.016" |
0.03" |
0.16" |
| |
| |
| | | Metal Welding
| | 0.017” thick sheet of titanium, 200W, 50 in/min , argon shield gas. The close-up view on the right shows the details of the weld and the very small heat-affected zone. | |
| | |
| | | Polymer Cutting
| | |  | | CO2 laser cut sample. The fiber strands are sealed. 25 W, 120 in/min. Material: polyeurathane, 1.96” wide, 0.035” thick. |
| | |  | | Scissor-cut samples. The polyester fibers are exposed. |
| | |  | | 0.1” thick rubber and glass-reinforced resin compound sheet, 40 W, 18 in/min |
| |
| |
| | | | | |  | | 0.05” Teflon sheet, 7.5 W, 5 kHz, 60 in/min, very good quality, no discoloration, accurate dimension tolerance (<0.002"). |
| | | | |
| |
| |
| | | Composite Cutting
| | Material: Al6061 alloy + 65 wt% SiB6 composite, 0.084”/2.1 mm 230 W, 5 kHz, 18 in/min | |
| | | | | |  | | Front side |
| | |  | | Rear side |
| |
| |
| |
| | | | Wire Stripping
| | 25-watt laser, marking head, 0.6" x 0.15" marking area, two-side processing, 2.3 seconds per side. | |
| | |
|
|
| | |
|
|
|
|
|
|
|
